top of page

Spur gear casting ladle is better than traditional worm gear:

The spur gear drive is similar to the wear-free rolling friction, which has an efficiency of 97%. But self-locking worm gear is sliding friction and is easy to wear. Its efficiency is 30%, so the spur gear casting ladle is wear-resistant and light. Detailed explanations are given in the following pages, with cases and videos. You can collect URL, spare.

The 10 t (20 t) spur gear casting ladle is a large ladle, consisting of a portable shaft and two brakes. In the early stage of pouring, the one brake is self-locking; in the later stage, the other brake is self-locking. They are automatically converted and the gap is adjustable.

Due to the high efficiency of the spur gear drive, it can be operated manually without the need for an electric motor. In a molten iron splash environment, it can work without cables.

Drawings for large spur gear casting ladle have been drawn and not yet manufactured. The picture is a combined photo of 1t, 5t, 2t, 0.5t.

Spur gear casting ladle 10t & 20t

SKU: 0
¥40,000.00Price
  • The hand chain hoist is driven by a gear, and the screw load brake is self-locking. The spur gear casting ladle also uses this principle, so it is as easy to use as a hand chain hoist.

    Hand chain hoist: hand pull its zipper, it lifts heavy objects. When the hand releases it, it stops and locks itself. Pull it again and go on.

    Pull the zipper on the other side, and it will land. When the hand releases it, it stops and locks itself. Pull it again and then it down. It operates freely, and is widely used.

bottom of page